Half screw connection EN1254, copper, 5359G
EN1254 copper 5359G
FITT-CON-HALF-EN1254-CU-20X3/4-5359G
Register now and access more than 125,000 products
- Universally usable in various areas of application such as shipbuilding, mechanical engineering and apparatus construction
- Meets the requirements of various DVGW regulations
- Other certification institutes too such as KIWA, BSI Kitemark, British Gas, Gaz de France, NF, SVGW
Suitability for drinking water is confirmed by DVGW type test certificates DV-7411AO2008 (copper fittings) and DV-7401AS2290 (gunmetal transition fittings). This is also confirmed by ÜA registration certificate no. R-15.2.3-20-17025 for 4000 series and R-15.2.3-20-17026 for 5000 series.
Datasheets(X)
- Drinking water installations DIN EN 806 and DIN 1988
- Natural gas installations DIN EN 1775 and DVGW G 600 (TRGI)
- LPG installations, technical rules for LPG (TRF)
- Heating oil supply systems DIN 4755 (TRÖ)
- Hot water heating DIN EN 12828
- Local and district heating lines DIN 4747
- Thermal solar systems
- Water-based room cooling systems
- Refrigeration equipment (ACR)
- Pneumatic
- Equipment for the distribution of technical and medical gases
- Rain water utilisation systems DIN 1989
- Fire-extinguishing pipes "wet" DIN 14462
- Sprinkler systems "wet" VdS CEA 4001
- Industrial and process water
- Wastewater pumping stations
 | |
Nominal diameter | 20 mm |
Length (a) | 39 mm |
Length 4 (Z/Za) | 18.5 mm |
Connection thread | G 3/4 inch |
Width across flats (S/S1) | 0 - not applicable |
Width across flats 2 (S2) | 0 - not applicable |
Material | Copper |
Surface | Plain |
Last viewed
Amo® III 7.5 type window frame screw Cylinder head 7.5 mm
Hexagonal bolt with flange
Additional function EPS
Roofing screw with hexagon head and drill tip
Safety boots, S2
Work trousers
Plus Quadro-L Vario hammer drill bit
Hexagonal bolt with flange in accordance with MBN standard
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
TIPP® A4 stainless steel pipe clamp 2 pieces