Hammer drill bit Max Quadro-S
Hammer drill bit Quadro-S Max 4-spiral
DRL-HAM-MAX-QUADRO-S-4SPRL-24/320/200
Register now and access more than 125,000 products
No hooking in
The drill bit tends to hook into reinforcements to a far lesser extent thanks to the geometry with four cutting edges.
Precise spot drilling
The special self-centring point enables precise spot drilling.
Greater precision
This is the result of the four cutting edges of the drill bit head being better positioned in the drill hole, as well as the four-spiral drill bit helix and the smaller friction surface. The four large-volume feed helixes ensure fast transport of drilling dust.
Please note: With long drill bit lengths, pre-drill with a short drill bit of the same diameter!
Iron reinforcements may only be drilled through with permission from a structural engineer.
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Safety boots, S3
HSCo Multi Performance machine tap for blind holes DIN 371/376
Hexagonal nut with clamping piece (non-metal insert)
Workbench PRO WUS 2
Helical insert W.TEC® INSERT COIL Free Running
Pliers For shaft circlips, DIN 5254
Low-cut safety shoes S1
Connection adhesive ALL-IN-ONE
Hexagonal nut, low profile ISO 4035 steel 05, plain
