Hammer drill bit Plus EUROFAST 4-spiral
Hammer drill bit Plus EUROFAST 4-spiral
DRL-HAM-PLUS-4-CUT-8,0X310/250
Register now and access more than 125,000 products
Significantly improved compatibility with reinforcements
The symmetrical 4 x 90° cutting edge geometry prevents the drill bit from hooking in or running off centre when striking e.g. reinforcements.
Noticeably quicker drilling
The advanced tip geometry and asymmetrically placed elevations on the cutting edges ensure improved traction.
Considerably improved drilling speed and dust removal while at the same time offering increased protection against breakage
Vario spiral conveyor with back that narrows at the front and widens at the rear, as well as sharper angle at the spiral end ensures reduced friction, high stability and maximum transmission of impact energy.
Optimum guidance in drilled hole
Drill bit with four cutting edges and four-spiral geometry to ensure that the bit is guided perfectly into the drilled hole.
Precise spot drilling
The special self-centring tip enables high-precision spot drilling.
Datasheets(X)
Diameter (Ø) | 8 mm |
Length | 310 mm |
Working length | 250 mm |
Tool holding device | Suitable for SDS-plus |
Last viewed
Washer with round hole Mainly for wood construction, DIN 440, plain steel
Plastic multi-purpose anchor SHARK® Pro
Tap wrench DIN 1814 Performance, adjustable
Holder For castors
1/4 inch socket wrench insert, metric short
Stretch X trousers
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, plain
Hexagon nut DIN EN 14399-4, steel 10Z, hot-dip galvanised, for high-strength structural bolting assemblies
Floor panel with integrated lashing rails
Slotted countersunk head screw DIN 963, A4 stainless steel, plain