Hammer head Halder series 3203
Impact insert Halder 3203 for Simplex s/f hammer
IMPINRT-3203.050-TPEMID-D50
Register now and access more than 125,000 products
The SIMPLEX hammer insert TPE-mid is a thermoplastic elastomer and is a medium-hard insert with a hardness of approx. 90 Shore A (comparable with the hardness of the rubber composition insert Series 3202). Compared to the conventional rubber hammer, this grey insert does not leave behind any unwanted black abrasion marks. It is available in sizes D30 mm to D60 mm.
For sensitive materials, setting natural stones, dry walling, furniture construction, laying tiles/panels, paving work, setting masonry/stairs, window/door construction, joinery
Material | Thermoplastic elastomer |
Diameter | 50 mm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
System connector SV 20 E
Silicone acetate bathroom unit
Kinvaro S-35 hinge flap fitting With integrated adjustable damping
Flat head drilling screws with recessed head and self-tapping screw thread
Shim ring For Standard clamping element
S1 safety shoe Steitz Pinus
Black NBR70 round cord
Safety boots, S3
Twist drill bit HSCo DIN 340 type RN OXIDE
ISO 15981 blind rivet assortment, round pan head In system case 4.4.1. Aluminium
