Hammer head Halder series 3203
Impact insert Halder 3203 for Simplex s/f hammer
IMPINRT-3203.060-TPEMID-D60
Register now and access more than 125,000 products
The SIMPLEX hammer insert TPE-mid is a thermoplastic elastomer and is a medium-hard insert with a hardness of approx. 90 Shore A (comparable with the hardness of the rubber composition insert Series 3202). Compared to the conventional rubber hammer, this grey insert does not leave behind any unwanted black abrasion marks. It is available in sizes D30 mm to D60 mm.
For sensitive materials, setting natural stones, dry walling, furniture construction, laying tiles/panels, paving work, setting masonry/stairs, window/door construction, joinery
Material | Thermoplastic elastomer |
Diameter | 60 mm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Work T-shirt Hakro 292
Steel spacer stud
Hexagonal nut
Angled hooks for Schäfer small parts shelf
Slotted flat-head screw DIN 85, steel 4.8, zinc-plated, blue passivated (A2K)
Connector, pneumatic
Low-cut safety shoes, S3
Adjustable straight sealing cone reducer fitting ISO 8434-1, stainless steel 1.4571, cutting ring connection with o-ring
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Low-cut safety shoes S3
