Hammer head Halder series 3207
Impact insert Halder 3207 for Simplex s/f hammer
IMPINRT-3207.051-SUPPLASTIK-D50:40
Register now and access more than 125,000 products
The SIMPLEX super plastic hammer insert (series 3207) is a medium-hard insert with a hardness of approx. 65 Shore D. This white plastic insert is made of extruded, extremely homogeneous material. Compared to injectionmoulded plastic inserts, it is therefore much more wear-resistant and stronger.
Gardening/landscaping, paving work, setting kerbstones, fencing, driving in splitting wedges, scaffolding, tents, sheet metal machining, fabricated house construction, joinery, carpentry, assembling sharp-edged workpieces
Material | Plastics - Polyamide PA |
Diameter | 50 mm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Concrete screw with pan head W-BS/A4
Low-cut safety shoes, S1
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, ≤ M24 A2-70 stainless steel, ≥ M24 A2-50 stainless steel
Bond + Seal structural adhesive
Heavy-duty clamping pin
Hexagon Socket Head Cap Screw full thread ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K), with full thread
Grooved ball bearings, POP FAG
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Ring bolt H.Q.E. with variable screw length
