Hammer head Halder series 3207
Impact insert Halder 3207 Simplex sledgehammer
IMPINRT-3207.125-SUPPLASTIK-D125
Art.-no. 1971008755
EAN 4030618301158
Register now and access more than 125,000 products
The SIMPLEX super plastic hammer insert (series 3207) is a medium-hard insert with a hardness of approx. 65 Shore D. This white plastic insert is made of extruded, extremely homogeneous material. Compared to injectionmoulded plastic inserts, it is therefore much more wear-resistant and stronger. It is available in sizes D30 mm to D140 mm.
Datasheets(X)
Gardening/landscaping, paving work, setting kerbstones, fencing, driving in splitting wedges, scaffolding, tents, sheet metal machining, fabricated house construction, joinery, carpentry, assembling sharp-edged workpieces
Material | Plastics - Polyamide PA |
Diameter | 125 mm |
Last viewed
Low-cut safety shoe S3 Steitz VX PRO 7550
Securing plate DIN 3017-2, type VS, W.TEC series
Self-drilling façade construction screw Sandwich piasta® A2 stainless steel
Ash handle
Safety boots, S3 Steitz Bergen Gore
Wire end ferrule without plastic sleeve DIN 46228 Part 1
Hexagonal bolt with thread up to head for pressure container construction DIN EN ISO 4017, A2 stainless steel
Hexagon bolt with threading up to head ISO 4017, steel, strength class 8.8, zinc flake, silver (ZFSHL)
SMART STEP EU+ HSCo nanoProtect hexagon twist drill bit for drill/drivers and tangential impact drivers
Hexagon bolt with thread up to the head ISO 4017, steel, strength class 8.8, zinc-nickel-plated, black (ZNBHL)