Hammer head Halder series 3508
Impact insert Halder 3508 f.Supercraft s/f hammer
IMPINRT-3508.050-NYLON-D50
Register now and access more than 125,000 products
The nylon inserts for SUPERCRAFT soft-face hammers (series 3508) are very hard with a hardness of approx. 73 shore D. These white polyamide inserts offer excellent impact properties and guarantee maximum strength with outstanding durability. They are made of extruded, extremely homogeneous material. Compared to injection-moulded plastic inserts, they are therefore much more wear-resistant and stronger. They do not shatter even at temperatures below freezing. They can withstand the high impact forces of recoil-free soft-face hammers. In addition, they are resistant to oil and grease and are also used in the SUPERCRAFT sledgehammers, punches and mallets.
Material | Nylon (polyamide) |
Diameter | 50 mm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Rigid electrical conduit WPKu-EM-F-H0 With moulded sleeve on one side
Twist drill bit, metal Ruko DIN 338 HSS-G black oxidised
Tex-Rein cleaning cloth
SC long twist drill bit DIN 338
Plus Quadro-L Vario hammer drill bit
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated thick-film passivated (ZSML)
Safety shoe S1
Wing repair washer In accordance with DIN 522, A2 stainless steel, plain
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive
Hexagon head bolt NAS6603-NAS6620, cadmium-plated steel
