Hammer head for punching Halder series 3508
Impact insert Halder 3508 for punches
IMPINRT-3508.010-NYLON-D10
Art.-no. 1971008706
EAN 4030618302155
Register now and access more than 125,000 products
The nylon inserts for SUPERCRAFT soft-face hammers (series 3508) are very hard with a hardness of approx. 73 shore D. These white polyamide inserts offer excellent impact properties and guarantee maximum strength with outstanding durability. They are made of extruded, extremely homogeneous material. Compared to injection-moulded plastic inserts, they are therefore much more wear-resistant and stronger. They do not shatter even at temperatures below freezing. They can withstand the high impact forces of recoil-free soft-face hammers. In addition, they are resistant to oil and grease and are also used in the SUPERCRAFT sledgehammers, punches and mallets.
Datasheets(X)
Material | Nylon (polyamide) |
Diameter | 10 mm |
Last viewed
Mini test tip set for measuring leads
Milling template set
Thin-walled heat-shrink hose shrink rate 3:1, with internal adhesive
Handle
Joint smoother geometric shape with angled edges
CEE extension lead
Template insert
Oval-head screws with H cross recess DIN 7985, steel 4.8, nickel-plated
GEFU® thread-rolling screw with Taptite 2000® thread, countersunk head with hexalobular drive
Hexagon nut with clamping piece (all-metal) DIN 980, zinc plated 10 steel with thick-layer passivation (VZD)