Hard-pressed compact fleece disc
Hard-pr. compact fleece disc angle/fillet sanding
SNDDISC-FLC-MED-HRDN8-3-BR22,23-D125
ZEBRA
Register now and access more than 125,000 products
- High removal rate at the lowest roughness
- Achieve constant surface quality
- Quickly achieve high-quality surfaces without modifying the workpiece geometry
- Achieve the lowest roughness in one work step, e.g. Ra 1.4301 becomes 0.02
- Resists clogging
- Long service life and comfortable working
The surface quality is an expression of the roughness (Ra value).
Datasheets(X)
Blue/green/yellow for steel, stainless steel and non-ferrous metals
Ideal for removing welding seams and blending the grinding finish in the area of fillet welds.
Application areas for higher hardness levels
- Removing aluminium burrs
- Deburring punched parts
- Rounding sharp edges and punched parts
- Cleaning metal contacts
- Removing adhesives, synthetic resins and leaked or excess composite adhesives
- Removing rust and corrosion
Areas of application for lower hardness levels
- Creating decorative surfaces on stainless steel
- Blending surfaces after the removal of welding seams
- Preparing titanium and stainless steel surfaces before polishing
- Preparing non-ferrous metals before coating
- Final pre-polishing stage
- Cross-fading surface errors
Diameter (Ø) | 125 mm |
Drill hole | 22.23 mm |
Thickness | 3 mm |
Hardness | 8 (hard) |
Design | Medium |
Grid size | Medium |
Min./max. rotation speed | 5300-7000 rpm |
Suitable for | Fillet weld grinder |
Last viewed
Thread cutter set NES 1015 8 pieces
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
Plaster strips, detectable Blue, containing metal
Exhaust slotted nut, reduced wrench size DIN 14441 heavily copper-plated steel
HSCo Multi Special MF thread machine tap for blind holes DIN 374
Work trousers
Sweatshirt Nitras Motion Tex Light 7015
Vehicle tool set inserts 1-6 294 pieces
Solid carbide end mill, quad blade with reinforced shank
Pipe cable lug with narrow flange