Welcome to Würth Aerospace Solutions For trade customers only

Hard wax, assortment

Hard wax assortment
RETCHWAX-SORT-HARDWAX-20PCS

Art.-no. 09648906
EAN 4024835074179

Prices for customers after login
Hard wax, assortment

Art.-no. 09648906

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

For filling larger damaged areas on the surface or around edges that are subsequently exposed to major stresses.

High strength


  • Especially for repairing areas exposed to high loads within the surface area

  • High abrasion resistance


Large choice of colours


  • Matching colours for a wide range of different wood colours

  • Broad range of applications


Colours can be mixed with each other


  • For optimum adaptation of the colour to the surface

  • Enables improved matching of wood grains


Inexpensive and simple repair instead of replacement or costly new treatment of the whole surface

Notice
  • Suitable for indoor use

  • Please follow the application instructions included with each assortment pack precisely

  • Please note that wood has a natural colour which is dependent on many different factors (e.g. origin, exact type of tree, surface treatment etc.). Therefore, an inconspicuous touch-up can never be carried out with a single wax colour.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

For filling deep cracks and scratches, open joints, holes and dents subject to major stresses. Suitable for front, surface and edge areas, as well as table-top surfaces, parquet floors and stair treads etc.

Instructions

Process the damaged area with the heated tip of the gas melter (art. no. 0890 305 3).


Allow the hard wax to cool down and remove excess areas using the plastic plane (art. no. 0890 305 30).


Trace the wood grain with touching-up materials and restore the pore pattern. Finally, seal the site with clear varnish (art. no. 0893 188 2/0893 188 3). For more information, please refer to the technical data sheet.

Number of pieces in assortment/set

20 PCS

Min. processing time

3 min

Max. processing time

5 min

Softening point

76 °C

Conditions for softening point

in accordance with ISO 2207

Min. dripping point

81 °C

Dripping point conditions

in accordance with DIN 51801

Min. flashing point

100 °C

Water-soluble

No

Shelf life from production

4 Years

Conditions to maintain shelf life from production

at room temperature

Hard wax, assortment including:
1 x
Hard wax

RETCHWAX-FUS-WHITE

Description:
Pure white
For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x
Hard wax

RETCHWAX-FUS-COLOURLESS

Description:
Colourless
For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x
Hard wax

RETCHWAX-FUS-MAPLE-NATURE

Description:
Maple
For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x
Hard wax

RETCHWAX-FUS-PINE

Description:
Pine
For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x
Hard wax

RETCHWAX-FUS-MAPLE-MIDDLE

Description:
Maple
For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x
Hard wax

RETCHWAX-FUS-BEECH-MIDDLE

Description:
Beech, middle
For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x
Hard wax

RETCHWAX-FUS-SEN-ASH

Description:
Ash
For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x
Hard wax

RETCHWAX-FUS-ALDER-MIDDLE

Description:
Alder, medium
For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x
Hard wax

RETCHWAX-FUS-BEECH-DARK

Description:
Beech, dark
For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x
Hard wax

RETCHWAX-FUS-OAK-BRIGHT

Description:
Oak bright
For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x
Hard wax

RETCHWAX-FUS-CHERRYTREE-MIDDLE

Description:
Cherry tree
For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x
Hard wax

RETCHWAX-FUS-PEARTREE-MIDDLE

Description:
Pear, middle
For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x
Hard wax

RETCHWAX-FUS-PEARTREE-DARK

Description:
Pear, dark
For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x
Hard wax

RETCHWAX-FUS-RUSTIC-OAK

Description:
Oak, rustic
For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x
Hard wax

RETCHWAX-FUS-OAK-DARK

Description:
Oak, dark
For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x
Hard wax

RETCHWAX-FUS-BROWN

Description:
Brown
For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x
Hard wax

RETCHWAX-FUS-WALNUT-MIDDLE

Description:
Walnut, medium
For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x
Hard wax

RETCHWAX-FUS-MAHOGANY-BROWN

Description:
Mahogany
For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x
Hard wax

RETCHWAX-FUS-BOG-OAK

Description:
Bog oak
For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
1 x
Hard wax

RETCHWAX-FUS-DEEP-BLACK

Description:
Jet black, similar to RAL 9005
For filling larger damaged areas on the surface or around edges that are subsequently exposed to major loads.
Quantity: 1 x
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additive article:
 
Product
Description
Quantity
PU
Price
/PU
Retouching paint box

RETCHBOX-12PCS

For retouching repaired surface damage.
x 1 pcs
Gas melter

GASMLT-RETCHWAX

Portable, gas-operated melter for quick and targeted melting of hard wax
x 1 pcs
Clear varnish

CLRLACSPR-MATT-ANTIFOGGING-400ML

Makes minor surface damage such as scratches, scrapes and chafe marks virtually invisible
Clear varnish

CLRLACSPR-SEMIGLOSS-ANTIFOGGING-400ML

Makes minor surface damage such as scratches, scrapes and chafe marks virtually invisible
Plastic plane

PLN-F.SRF-PLA

For applying fillers such as 2-component repair filler RSM, hard, soft and retouching wax.
x 2 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 6
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information