Heat protection glove H-110
Heat protection glove H-110
HEATPROTGLOV-H-110-SZ9
Register now and access more than 125,000 products
Short-term protection against contact heat up to 250°C
Liquid-tight nitrile coating with tall nubs
- No direct contact with hot liquids or vapours
- Good grip
- Can also be used in slightly oily environments
Additional cut protection and increased service life due to reinforced crook of the thumb
Extremely good mechanical resilience
Comfortable to wear
Datasheets(X)
- Work with hot and sharp-edged objects
- Work involving low to medium cut protection and mechanical stress requirements such as heat protection
- Plastic, metalworking, steel and glass industries
Size | 9 |
Gauge | 10 |
Material of liner | Aramid fibre |
Material of coating | Nitrile foam |
Standards | EN 388:2016+A1:2018, EN 407:2004, EN 420 |
Category | II |
Material | 0 - not applicable |
Last viewed
Hexagon head bolt with thread up to head for pressure vessel construction ISO 4017, steel 5.6, zinc-plated, blue passivated (A2K)
Double cartridge gun for 225/250 ml
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, plain
Concealed slide full-extension slide Dynapro With integrated soft-close system
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Locking system, DPS
Work dungarees
Socket outlet
Hexagon socket set screw with truncated cone ISO 4026 steel 8.8, zinc-plated blue passivated (A2K)
Adjustable straight sealing cone male fitting ISO 8434-1, zinc-nickel-plated steel, BSPP male thread with o-ring