Heat-shrink repair sleeve
Heat shrink repair sleeve
REPSLEV-HSHR-L750MM-36/10MM
Register now and access more than 125,000 products
- Inside coated with hot-melt adhesive
- Good physical, chemical and thermal properties
Meets the requirements of VDE 0298 Part 1 for cable sheath tests
Datasheets(X)
Fast, permanent and water-tight repair of damaged cable sheaths. The sealing rail can be removed after the sleeve has cooled down.
 | |
Type | 34/8 |
Diameter (D) | 36 mm |
Diameter (shrunk) | 10 mm |
Length | 750 mm |
Sleeve-wall thickness when shrunk | 3.2 mm |
Dielectric strength | 12 kV/mm |
Min./max. temperature conditions | -40 to 65 °C |
Min. shrinkage temperature | 90 °C |
Change in length (after shrinking, in %) | -10% |
Ultraviolet resistance | Yes |
Material | Polyolefin |
Halogen-free | Yes |
Colour | Black |
Last viewed
Filler Light filler
Soft-face hammer Halder Supercraft soft-face hammer Series 3377
Trough panel plug-in wall
Hexagonal bolt with shank and fine thread DIN 960, steel 10.9, zinc-plated, blue passivated (A2K)
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
T-piece, reduced with solder connection EN1254, copper, 5130R
Adhesive lubricant HHS® 5000
Textile protective glove Ejendals TEGERA® 767
Twist drill bit HSCo DIN 338 type RN bronze point thinning
O-ring, metric