Heat-shrink repair sleeve
Heat shrink repair sleeve
REPSLEV-HSHR-L750MM-85/22MM
Register now and access more than 125,000 products
- Inside coated with hot-melt adhesive
- Good physical, chemical and thermal properties
Meets the requirements of VDE 0298 Part 1 for cable sheath tests
Datasheets(X)
Fast, permanent and water-tight repair of damaged cable sheaths. The sealing rail can be removed after the sleeve has cooled down.
 | |
Type | 93/25 |
Diameter (D) | 85 mm |
Diameter (shrunk) | 22 mm |
Length | 750 mm |
Sleeve-wall thickness when shrunk | 3.6 mm |
Dielectric strength | 12 kV/mm |
Min./max. temperature conditions | -40 to 65 °C |
Min. shrinkage temperature | 90 °C |
Change in length (after shrinking, in %) | -10% |
Ultraviolet resistance | Yes |
Material | Polyolefin |
Halogen-free | Yes |
Colour | Black |
Last viewed
Support clip type SRZ
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Insulating and sealing primer
Low-cut safety shoes, S3
Hexagon socket bit
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Spiral clamping pin, standard design ISO 8750 steel plain
Bracket set For DWD XP wooden back panel H182 frame system
EA SRC SB slipper
Stud with threaded end ≈ 2d