Heat-shrink wall duct
Heat shrink wall duct
WLLDTHRGH-(12-25MM)
Register now and access more than 125,000 products
- Hose ends coated with sealing compound
- Good physical, chemical and thermal properties
- Longitudinally water and gas tight up to 0.1 MPa
Two wall ducts can be joined together for larger wall thicknesses.
Datasheets(X)
For feeding cables with plastic or paper insulation through concrete and brickwork
 | |
Suitable for cable diameter | 12 - 25 mm |
Diameter (D) | 28 mm |
Diameter (shrunk) | 10 mm |
Length (L) | 700 mm |
Effective length (L1) | 520 mm |
Material | Polyolefin |
Ultraviolet resistance | Yes |
Last viewed
Conical countersink HSS Ruko DIN 335 TiAIN form C
Threaded mandrel with chuck
Knife pouch
Double box-end wrench, inch, extra long
Steel spacer stud
Straight pin, unhardened DIN 7, A1 stainless steel, plain
Action functional trousers
Shroud turnbuckle A4 stainless steel, closed
Hexagon socket set screw with truncated cone ISO 4026 steel 8.8, plain
Wire end ferrule without plastic sleeve DIN 46228 Part 1