Heating pipe rack, type 1 With narrow carrier
Heating pipe rack, type 1, with narrow carrier
SLIDBEAR-TZN-DA114,3-TYP1-RS78
Register now and access more than 125,000 products
- Pipe rack with a welded pipe clamp
- Hot-dip galvanised screws and nuts, FK 8.8
Load specifications for standard dimensions at +100°C taking as basis customary screw tightening torques. Note potentially reduced load on clamped connection. All pipe bearings are also available upon request with pipe clamp rotated 45°.
Datasheets(X)
CAD data (available after login)
 | |
DN nominal width | DN 100 |
Outer diameter of pipe (ØD) | 114.3 mm |
Length (L1) | 150 mm |
Carrier width (B) | 70 mm |
Clamp width (BM) | 50 |
Tube axis dimension (RA) | 135 mm |
Bottom of pipe (RS) | 78 mm |
Product weight (per item) | 2780.000 g |
Surface | Hot dip galvanized |
Material | Steel |
Last viewed
Work trousers Cetus
Cold wood glue D2 Complies with stress group D2 in accordance with DIN EN 204
EPS profile double cylinder
Straight reducer fitting ISO 8434-1, zinc-nickel-plated steel
End piece For FB windowsill duct
Steel spacer stud
Work overall
Guide head set For CPS cable feed devices (apart from CPS 1)
Safety boots, S3
Chemical protective glove Ansell Gladiator® 16-650