Heating pipe rack, type 1 With narrow carrier
Heating pipe rack, type 1, with narrow carrier
SLIDBEAR-TZN-DA219,1-TYP1-RS78
Register now and access more than 125,000 products
- Pipe rack with a welded pipe clamp
- Hot-dip galvanised screws and nuts, FK 8.8
Load specifications for standard dimensions at +100°C taking as basis customary screw tightening torques. Note potentially reduced load on clamped connection. All pipe bearings are also available upon request with pipe clamp rotated 45°.
Datasheets(X)
CAD data (available after login)
 | |
DN nominal width | DN 200 |
Outer diameter of pipe (ØD) | 219.1 mm |
Length (L1) | 150 mm |
Carrier width (B) | 80 mm |
Clamp width (BM) | 50 |
Tube axis dimension (RA) | 198 mm |
Bottom of pipe (RS) | 88 mm |
Product weight (per item) | 4340.000 g |
Surface | Hot dip galvanized |
Material | Steel |
Last viewed
Screw for ISO S clamping system
Slotted countersunk head screw ISO 2009, steel 4.8, plain
Concrete screw EUROFAST ® DFCF
Washer for bolts
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
NP profile double cylinder In 6-pin system
Balcony sealing and uncoupling membrane CERAfix® 315
Raised countersunk head screw with recessed head, H ISO 7047, steel 4.8, zinc-plated thick-film passivated (ZSML)
Stretch X softshell jacket
Twin rail