Heating pipe rack, type 1 With narrow carrier
Heating pipe rack, type 1, with narrow carrier
SLIDBEAR-TZN-DA26,9-TYP1-RS65
Register now and access more than 125,000 products
- Pipe rack with a welded pipe clamp
- Hot-dip galvanised screws and nuts, FK 8.8
Load specifications for standard dimensions at +100°C taking as basis customary screw tightening torques. Note potentially reduced load on clamped connection. All pipe bearings are also available upon request with pipe clamp rotated 45°.
Datasheets(X)
CAD data (available after login)
 | |
DN nominal width | DN 20 |
Outer diameter of pipe (ØD) | 26.9 mm |
Length (L1) | 100 mm |
Carrier width (B) | 60 mm |
Clamp width (BM) | 30 mm |
Tube axis dimension (RA) | 79 mm |
Bottom of pipe (RS) | 66 mm |
Product weight (per item) | 860 g |
Surface | Hot dip galvanized |
Material | Steel |
Last viewed
Spacer washer
pias® drilling screw, flat head with AW drive
PVC sheathing system
Washer For reduced shank screw in hygienic design
Clear varnish
EPS profile thumbturn cylinder
Hexagon nut, heavy-duty design, inch
Extension pipe For wall and ceiling sander WSS 225-E Compact
Cross cabinet hinge, heavy-duty
Safety boots, S3