Heating pipe rack, type 1 With narrow carrier
Heating pipe rack, type 1, with narrow carrier
SLIDBEAR-TZN-DA323,9-TYP1-RS88
Register now and access more than 125,000 products
- Pipe rack with a welded pipe clamp
- Hot-dip galvanised screws and nuts, FK 8.8
Load specifications for standard dimensions at +100°C taking as basis customary screw tightening torques. Note potentially reduced load on clamped connection. All pipe bearings are also available upon request with pipe clamp rotated 45°.
Datasheets(X)
CAD data (available after login)
 | |
DN nominal width | DN 300 |
Outer diameter of pipe (ØD) | 323.9 mm |
Length (L1) | 150 mm |
Carrier width (B) | 80 mm |
Clamp width (BM) | 60 mm |
Tube axis dimension (RA) | 250 mm |
Bottom of pipe (RS) | 88 mm |
Product weight (per item) | 6240 g |
Surface | Hot dip galvanized |
Material | Steel |
Last viewed
GPN 210 grip cap Ethylene vinyl acetate (EVA), free from plasticisers, yellow
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Disc spring for ball bearing, slotted
PRINETO® Cuphin angle transition with external thread
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Handymax application gun, 585 ml
Thin-walled heat-shrink hose Shrink rate 2:1 without internal adhesive
ASSY®plus 4 CS universal screw Hardened zinc-plated steel full thread countersunk head
Pan head screw with H cross recess DIN 7985, A2 stainless steel, plain
Tyre pressure monitoring system, tool set For the professional installation of tyre pressure monitoring sensors