Heating pipe rack, type 1 With narrow carrier
Heating pipe rack, type 1, with narrow carrier
SLIDBEAR-TZN-DA88,9-TYP1-RS66
Register now and access more than 125,000 products
- Pipe rack with a welded pipe clamp
- Hot-dip galvanised screws and nuts, FK 8.8
Load specifications for standard dimensions at +100°C taking as basis customary screw tightening torques. Note potentially reduced load on clamped connection. All pipe bearings are also available upon request with pipe clamp rotated 45°.
Datasheets(X)
CAD data (available after login)
 | |
DN nominal width | DN 80 |
Outer diameter of pipe (ØD) | 88.9 mm |
Length (L1) | 100 mm |
Carrier width (B) | 60 mm |
Clamp width (BM) | 40 |
Tube axis dimension (RA) | 111 mm |
Bottom of pipe (RS) | 67 mm |
Product weight (per item) | 1360.000 g |
Surface | Hot dip galvanized |
Material | Steel |
Last viewed
Turnbuckle, open form with welded ends DIN 1480, steel, zinc-plated, blue passivated (A2K)
WLA 18.0 cordless LED work lamp With two high-performance LED arrays
Sealing ring
Countersunk washer/washer A1 stainless steel
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, zinc-plated, blue passivated (A2K)
3/8-inch socket wrench insert, metric long
Low-cut safety shoes, S2
Slotted flat-head screw DIN 85, steel 4.8, zinc-plated, blue passivated (A2K)
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head with hexalobular drive
Thread-rolling screw