Heating pipe rack, type 2 With narrow carrier
Heating pipe rack, type 2, with narrow carrier
SLIDBEAR-TZN-DA21,3-TYP2-RS65
Register now and access more than 125,000 products
- Pipe rack with two welded pipe clamps
- Hot-dip galvanised screws and nuts, FK 8.8
Load specifications for standard dimensions at +100°C taking as basis customary screw tightening torques. Note potentially reduced load on clamped connection. All pipe bearings are also available upon request with pipe clamp rotated 45°.
Datasheets(X)
CAD data (available after login)
 | |
DN nominal width | DN 15 |
Outer diameter of pipe (ØD) | 21.3 mm |
Length (L1) | 200 mm |
Carrier width (B) | 60 mm |
Clamp width (BM) | 30 mm |
Tube axis dimension (RA) | 76 mm |
Bottom of pipe (RS) | 65 mm |
Product weight (per item) | 1700 g |
Surface | Hot dip galvanized |
Material | Steel |
Last viewed
ASSY®4 test set 1,285 pieces
Hexagonal bolt with shank DIN 601, steel 4.8U, hot-dip galvanised (hdg)
SPE wide sanding belt, individual
Hexagonal bolt with thread up to the head DIN 933, A4 stainless steel, plain
Flat washer
Business shirt
System cabinet workbench 2000 mm with 3 undercounter blocks 8.6
WÜPOFAST® steel zinc-plated yellow chipboard screw Full thread, raised countersunk head, PZ
Complete printed Classic number plate holder
918-5 test gas For smoke detector and smoke switch