Heating pipe rack, type 2 With narrow carrier
Heating pipe rack, type 2, with narrow carrier
SLIDBEAR-TZN-DA33,7-TYP2-RS65
Register now and access more than 125,000 products
- Pipe rack with two welded pipe clamps
- Hot-dip galvanised screws and nuts, FK 8.8
Load specifications for standard dimensions at +100°C taking as basis customary screw tightening torques. Note potentially reduced load on clamped connection. All pipe bearings are also available upon request with pipe clamp rotated 45°.
 | |
DN nominal width | DN 25 |
Outer diameter of pipe (ØD) | 33.7 mm |
Length (L1) | 200 mm |
Carrier width (B) | 60 mm |
Clamp width (BM) | 30 |
Tube axis dimension (RA) | 82 mm |
Bottom of pipe (RS) | 65 mm |
Product weight (per item) | 1780.000 g |
Surface | Hot dip galvanized |
Material | Steel |
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Last viewed
Thin-walled heat-shrink hose Without internal adhesive
Work trousers
Lever set Mirka MIE6510111
Rear panel
Dry abrasive paper roll wood KP perfect KP perfect
Jacket Planam Highline
Straight connector, insertable For central lubrication units
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
Cylinder head screw with hexagon socket
Type ETA-Q staples Plain stainless steel 1.4301, resin-coated
