Heating pipe rack, type 2 With narrow carrier
Heating pipe rack, type 2, with narrow carrier
SLIDBEAR-TZN-DA88,9-TYP2-RS66
Register now and access more than 125,000 products
- Pipe rack with two welded pipe clamps
- Hot-dip galvanised screws and nuts, FK 8.8
Load specifications for standard dimensions at +100°C taking as basis customary screw tightening torques. Note potentially reduced load on clamped connection. All pipe bearings are also available upon request with pipe clamp rotated 45°.
Datasheets(X)
CAD data (available after login)
 | |
DN nominal width | DN 80 |
Outer diameter of pipe (ØD) | 88.9 mm |
Length (L1) | 200 mm |
Carrier width (B) | 60 mm |
Clamp width (BM) | 40 mm |
Tube axis dimension (RA) | 111 mm |
Bottom of pipe (RS) | 67 mm |
Product weight (per item) | 2730 g |
Surface | Hot dip galvanized |
Material | Steel |
Last viewed
Heavy-duty clamping pin
Work dungarees
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, plain
EPS profile thumbturn cylinder for keyed alike systems with original equipment
Pneumatic valve spring compressor 15 pieces
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
Stud with head, shape B
ASSY® 3.0 zinc-plated blue chipboard screw
Hexagonal bolt with shank and fine thread
Tension spring with double eyes DIN 2097, spring steel wire, zinc-plated steel