Heating pipe rack, type 2 with narrow carrier
SLIDBEAR-TZN-DA219,1-TYP2-RS78
Art.-no. 0862948219
EAN 4046778406695
Register now and access more than 125,000 products
- Pipe rack with two welded pipe clamps
- Hot-dip galvanised screws and nuts, FK 8.8
Load specifications for standard dimensions at +100°C taking as basis customary screw tightening torques. Note potentially reduced load on clamped connection. All pipe bearings are also available upon request with pipe clamp rotated 45°.
Datasheets(X)
 | |
DN nominal width | DN 200 |
Outer diameter of pipe (ØD) | 219.1 mm |
Length (L) | 250 mm |
Carrier width (B) | 80 mm |
Clamp width (BS) | 50 |
Tube axis dimension (H) | 198 mm |
Bottom of pipe (H1) | 88 mm |
Product weight (per item) | 8660.000 g |
Surface | Hot dip galvanized |
Material | Steel |
Last viewed
Round head screw with square neck and nut DIN 603, steel 4.8, plain, with nut
Double-sided hook and loop fastener strip
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw ISO 4762, 10.9 steel with silver zinc-flake coating (ZFSHL)
Spacer stud, polyamide, hex, F/M
HSCo8 keyway end mill, short, twin blade, centre-cutting DIN 327D
ABS POWER/AFS M-CUBE 2-in-1 case set 5 pieces
Hexagon bolt with shank DIN 931, steel 8.8, zinc-plated, blue passivated (A2K)
Screwdriver for hexagon drive
Screw-in plug GPN 550