Heavy Duty non-slip floor marking adhesive tape
Floor marking adhesive tape, SA R11, non-slip
FLRMARKTPE-SA-NONSLP-BLUE-50MMX12,5M
Register now and access more than 125,000 products
- Self-adhesive
- Extremely wear-resistant
- Quick to apply
- With silicone paper
- Meets the requirements of DIN 4844 or DIN EN ISO 7010
- Tape can be driven over by industrial trucks, passenger cars, commercial vehicles, etc. Revolving and turning on the tape should be avoided.
- For outdoor use, apply butyl primer first. This significantly increases the adhesion strength of adhesive tape on all surfaces.
- The adhesion surface must be dry and free from grease and dust.
Datasheets(X)
Non-slip floor marking for indoor and outdoor rough and uneven surfaces such as stairs and ramp edges, warehouse/logistics, work areas, lifting platforms, workshop pits, wet areas.
Length | 12.5 m |
Width | 50 mm |
Thickness | 1.6 mm |
Colour | Blue |
Suitable for use in the following materials | Concrete screed |
Area of application | Outdoors |
Min./max. temperature conditions | -20 to 80 °C |
Min./max. processing temperature | 15 to 25 °C |
Min. processing temperature | 15 °C |
Material | PU fabric reinforced |
Adhesive base | Natural rubber |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!