Heavy-duty roof hook Gravity die-cast aluminium
Heavy duty roof hook
ROOFHOK-ALUD-HDUT-PL180X70MM-HO9MM
ZEBRA
Register now and access more than 125,000 products
Height compensation of up to 30 mm
Roof unevenness can be easily compensated by the mounting rail.
Ribbing on bracket
Optimum positive and friction locking
Fully pre-assembled
Mounting rail, 39 x 37, 47 x 37 and 60 x 37, can be attached to the roof hook without preparatory work.
Maximum load values
- Pressure parallel to roof surface: 2.35 kN
- Pressure perpendicular to roof surface: 2.05 kN
- Tensile force perpendicular to roof surface: -2.05 kN
We recommend using two ASSY 3.0 wood screws, countersunk 8 x 100 mm, A2 stainless steel, to attach each roof hook to the rafters. Please observe edge and axial clearances in accordance with general technical approval.
General technical approval Z-14.4-515
Base hole diameter | 9 mm |
Material | Aluminium |
Product weight (per item) | 490.500 g |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Plastic cover cap for aluminium bracket
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
Baseball flex cap
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Moveable and lowerable module For system cabinet workbench
ORSY®BULL partition element basic set For dividing ORSY®BULL top loader boxes according to requirements
Hexagonal bolt with thread up to the head ISO 4017, brass, plain
Cover plate Type DP
Cable grommet CR
