Helical insert W.TEC^® INSERT COIL Free Running

Name: Helical insert W.TEC ® INSERT COIL Free Running
Brand: Würth
SKU: 462733 495

Wire thread insert FR A2 W.TEC series
HELCINRT-FR-A2-M33X49,5
W.TEC

Art.-no. 462733 495

EAN 4055375076620

All versions

Specification

For producing a lasting, heavy-duty female thread. With free running, true to gauge thread. Made of A2 stainless steel

Perfect combination of space-spacing and wear-resistant thread strength

Optimal force distribution

Flexibility of the thread inserts compensates for pitch and angle errors

Thread insert sits securely

Minimised thread friction torque and minimised torsional stress

Increased corrosion resistance

Space and weight minimisation

Smaller number of required connection points and/or reduced screwing dimensions

Costs minimised

By reinforcing the thread, which effectively minimises the repair costs

Proof of Performance

The tolerance position of the ISO thread corresponds to 6H following installation.

Instructions

A resistant thread in 4 steps:

Step 1:

Drill a core hole or drill out the damaged thread

Step 2:

Create a receiving thread

Without cutting using thread moulding for an even more resilient receiving thread

Step 3:

Set the thread insert

The helical insert can be mounted both mechanically and also by hand using the corresponding screw-in tool.

Step 4:

Break the pin

Separate the follower pin by tapping gently on the predetermined break point with a pin breaker, and then remove. Automatic pin breakers are also available for series production.


Material	Stainless steel A2
Surface	Plain
Design	Free running
Thread type x nominal diameter	M33
Length built-in state (l₁)	49.5 mm
Outer diameter (d₁)	37.5 mm
Thread form	Standard metric thread
Pitch	3.5 mm
Core hole diameter	33.5 mm
Min. core hole depth	65.25 mm
Required thread depth at stud hole	61.75 mm