Helical insert W.TEC® INSERT COIL Free Running fine thread
Wire thread insert FR A2 fine thread W.TEC series
HELCINRT-FR-A2-M24X2,0X48
W.TEC
Register now and access more than 125,000 products
Perfect combination of space-spacing and wear-resistant thread strength
- In low-strength metal materials
- In plastics
Optimal force distribution
Flexibility of the thread inserts compensates for pitch and angle errors
Thread insert sits securely
Minimised thread friction torque and minimised torsional stress
Increased corrosion resistance
Space and weight minimisation
Smaller number of required connection points and/or reduced screwing dimensions
Costs minimised
By reinforcing the thread, which effectively minimises the repair costs
The tolerance position of the ISO thread corresponds to 6H following installation.
Datasheets(X)
CAD data (available after login)
A resistant thread in 4 steps:
Step 1:
Drill a core hole or drill out the damaged thread
Step 2:
Create a receiving thread
- By cutting using screw tap
OR
- Without cutting using thread moulding for an even more resilient receiving thread
Step 3:
Set the thread insert
- The helical insert can be mounted both mechanically and also by hand using the corresponding screw-in tool.
Step 4:
Break the pin
- Separate the follower pin by tapping gently on the predetermined break point with a pin breaker, and then remove. Automatic pin breakers are also available for series production.
 | |
Material | Stainless steel A2 |
Surface | Plain |
Design | Free running |
Thread type x nominal diameter x pitch | M24 x 2 |
Length built-in state | 48 mm |
Min. external diameter | 26.5 mm |
Thread form | Fine pitch thread |
Pitch | 2 mm |
Core hole diameter | 24.5 mm |
Min. core hole depth | 57 mm |
Required thread depth at stud hole | 55 mm |
Last viewed
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Ball knob DIN 319, thermoset FS 31, black polished, shape C with thread made of plastic
Plastic multi-purpose ZEBRA Shark® anchor with collar
Hexagon nut, low profile
Welder's hammer
Stud with threaded end ≈ 1.25 d DIN 939, A4 stainless steel, plain
Sealing ring, copper, shape A
Retaining pin For square holes in perforated plates, workshop trolleys and the ORSY®1 shelving systems
Work trousers