Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised
ISO 4014 hot-dip galvanised steel 8.8U
SCR-HEX-ISO4014-8.8U-(HDG)-WS21-M14X80
Register now and access more than 125,000 products
- Manufactured with undersized thread in tolerance class 6AZ (thread play) before surface protection is applied (DIN EN ISO 10684)
- The screw is ISO compliant after hot-dip galvanisation
- Do not use with nuts that have an oversized thread. This can create screwing-in problems and may cause the connection to fail
ISO 4014 replaces DIN 931 | There is some similarity | Nominal dimensions extended | Width across flats changed for M10, M12, M14 and M22.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M14 |
Length (l1) | 80 mm |
Head height (k1) | 8.8 mm |
External drive (s1) | WS21 |
Standards | ISO 4014 |
Material | Steel |
Property class | 8.8U |
Surface | Hot dip galvanized |
Head type | Hexagon head |
Drive type | Outer hexagon |
Thread type | Metric thread |
Thread form | Standard metric thread |
Thread design | Partial thread |
Thread length (metric thread) (b) | 34 mm |
Design | With shaft |
Product class | A |
Regulated area | 0 - not applicable |
Construction product | 0 - not applicable |
RoHS-compliant | Yes |
Last viewed
Door handle A 803 on oval escutcheon
Cover cap for screws with head recess
Steel zinc plated grade 5
VARIFIX® Systemfix quick fastener With threaded rod
Glazing block With slip protection
Slotted raised countersunk head screw ISO 2010, A2 stainless steel, plain
O-ring, metric
Low-cut safety shoes, S1P
Flat nut with small wrench size, fine thread DIN 80705, steel, 14H, plain
Hammer drill bit Plus Duo-S Vario