Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised
ISO 4014 hot-dip galvanised steel 8.8U
SCR-HEX-ISO4014-8.8U-WS70-(HDG)-M45X200
Register now and access more than 125,000 products
- Manufactured with undersized thread in tolerance class 6AZ (thread play) before surface protection is applied (DIN EN ISO 10684)
- The screw is ISO compliant after hot-dip galvanisation
- Do not use with nuts that have an oversized thread. This can create screwing-in problems and may cause the connection to fail
ISO 4014 replaces DIN 931 | There is some similarity | Nominal dimensions extended | Width across flats changed for M10, M12, M14 and M22.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M45 |
Length (l1) | 200 mm |
Head height (k1) | 28 mm |
External drive (s1) | WS70 |
Standards | ISO 4014 |
Material | Steel |
Property class | 8.8U |
Surface | Hot dip galvanized |
Head type | Hexagon head |
Drive type | Outer hexagon |
Thread type | Metric thread |
Thread form | Standard metric thread |
Thread design | Partial thread |
Thread length (metric thread) (b) | 102 mm |
Design | With shaft |
Product class | B |
RoHS-compliant | Yes |
Last viewed
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
VARIFIX® hammer head fastener standard fix Pre-assembled with nut and washer, zinc-plated
ISO insert holder with M clamping system for VN indexable inserts
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised
Leakage detection forming gas starter set
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Zinc safety spoke weight, Mercedes Benz
Hammer head bolt with square neck DIN 186, A2 stainless steel, plain
Low-cut safety shoes, S2
Die For standard metric ISO thread HSCo Multi Performance