Hex head screw with thread up to head DIN 933, steel 8.8U, hot-dip galvanised (hdg)
DIN 933 hot-dip galvanised steel 8.8U
SCR-HEX-DIN933-8.8U-WS65-(HDG)-M42X160
Register now and access more than 125,000 products
- Manufactured with undersized thread in tolerance class 6AZ (thread play) before surface protection is applied (DIN EN ISO 10684).
- The screws are ISO-compliant after hot-dip galvanisation.
- The screws must not be used with nuts that have an oversized thread. This can create problems in the screwed joint and may cause the connection to fail.
DIN 933 has been withdrawn and replaced by ISO 4017. There is some similarity (nominal dimensions extended | width across flats changed for M10, M12, M14 and M22).
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M42 |
Length (l1) | 160 mm |
Head height (k1) | 26 mm |
External drive (s1) | WS65 |
Standards | DIN 933 |
Material | Steel |
Property class | 8.8U |
Surface | Hot dip galvanized |
Head type | Hexagon head |
Drive type | Outer hexagon |
Thread type | Metric thread |
Thread form | Standard metric thread |
Thread design | Full thread |
Thread length (metric thread) | 160 mm |
Product class | B |
RoHS-compliant | Yes |
Last viewed
Large flat paintbrush Professional
Protective glove, leather Ejendals Tegera 7798
Oval-head screws with H cross recess DIN 7985, steel 4.8, plain
MFD-S multi-purpose drill bit with straight shank
Low-cut safety shoes, S1
FLEXEN® cold rubber 2 m hose
Hexagonal bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain
G-fuse 5x20
Hexagon socket set screw with pin ISO 4028, steel, 45H, plain
Connecting technology