Hex head screw with thread up to head DIN 933, steel 8.8U, hot-dip galvanised (hdg)
DIN 933 hot-dip galvanised steel 8.8U
SCR-HEX-DIN933-8.8U-WS65-(HDG)-M42X200
Register now and access more than 125,000 products
- Manufactured with undersized thread in tolerance class 6AZ (thread play) before surface protection is applied (DIN EN ISO 10684).
- The screws are ISO-compliant after hot-dip galvanisation.
- The screws must not be used with nuts that have an oversized thread. This can create problems in the screwed joint and may cause the connection to fail.
DIN 933 has been withdrawn and replaced by ISO 4017. There is some similarity (nominal dimensions extended | width across flats changed for M10, M12, M14 and M22).
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M42 |
Length (l1) | 200 mm |
Head height (k1) | 26 mm |
External drive (s1) | WS65 |
Standards | DIN 933 |
Material | Steel |
Property class | 8.8U |
Surface | Hot dip galvanized |
Head type | Hexagon head |
Drive type | Outer hexagon |
Thread type | Metric thread |
Thread form | Standard metric thread |
Thread design | Full thread |
Thread length (metric thread) | 200 mm |
Product class | B |
RoHS-compliant | Yes |
Last viewed
Lever riveter HNG 26 N
Softshell jacket One
1/2 inch POWERDRIV® socket wrench insert metric, bi-hex, long
Hexagonal bolt with thread up to head ISO 4017, steel, strength class 10.9, zinc-nickel-plated, silver (ZNSHL)
Cable gland, metric
Case insert for MASTER/M-CUBE power tools
Work trousers
Universal scriber With locking screw
System drawer cabinet 16.8: 1037x770 mm
piasta® drilling screw, hexagon head A2 stainless steel with drill tip and moulded thread made of hardened steel