Hex head screw with thread up to head DIN 933, steel 8.8U, hot-dip galvanised (hdg)
DIN 933 hot-dip galvanised steel 8.8U
SCR-HEX-DIN933-8.8U-WS75-(HDG)-M48X130
Register now and access more than 125,000 products
- Manufactured with undersized thread in tolerance class 6AZ (thread play) before surface protection is applied (DIN EN ISO 10684).
- The screws are ISO-compliant after hot-dip galvanisation.
- The screws must not be used with nuts that have an oversized thread. This can create problems in the screwed joint and may cause the connection to fail.
DIN 933 has been withdrawn and replaced by ISO 4017. There is some similarity (nominal dimensions extended | width across flats changed for M10, M12, M14 and M22).
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M48 |
Length (l1) | 130 mm |
Head height (k1) | 30 mm |
External drive (s1) | WS75 |
Standards | DIN 933 |
Material | Steel |
Property class | 8.8U |
Surface | Hot dip galvanized |
Head type | Hexagon head |
Drive type | Outer hexagon |
Thread type | Metric thread |
Thread form | Standard metric thread |
Thread design | Full thread |
Thread length (metric thread) | 130 mm |
Product class | B |
RoHS-compliant | Yes |
Last viewed
Concrete fastener EUROFAST® ISPC-A2
Milling bit Ruko tungsten carbide milling bit type N angle (WKN) plain
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
Hammer drill bit Plus Quadro-S
Roof construction screw
Hexagonal nut with flange and clamping piece (all-metal) according to MBN standard
Hexagonal nut
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Spring cotter pin With single loop. Zinc-plated steel, blue passivated
Work dungarees