Hexagon Socket Head Cap Screw
ASME B18.3 stainless steel 18-8 plain UNC
SCR-HX-SOC-(18-8)-1/4_20X2 3/4
Register now and access more than 125,000 products
1 INCH (in) = 25.4 mm
18-8 is comparable with an A2 stainless steel. Mechanical properties based on ASTM F837
Standard thread tolerance according to ASME B1.1 = 3A (for external thread)
Datasheets(X)
 | |
Nominal diameter (d1) | 1/4 in |
Length (l1) | 2-3/4 in |
Head diameter | 0.375 in |
Head height | 0.250 in |
Internal drive (s1) | HS3/16 inch |
Material | Stainless steel AISI 304, 18-8 |
Surface | Plain |
Number of thread starts per inch | 20 |
Last viewed
Speedcut Universal solid carbide end mill, short, optional, four blades, uneven angle of twist gradient, HB shank
Spyhole, type B With crystalline lens and 200° viewing angle
STAMCOLL AS adhesive and sealant For bonding Stamisol overlaps and connecting to roofs and façades
1/2 inch POWERDRIV® socket wrench insert metric, bi-hex, long
Disposable nitrile grip glove
T-piece, reduced with solder connection EN1254, copper, 5130R
Rust remover Rost-Off
Stud with threaded end ≈ 1.25 d DIN 939, A4 stainless steel, plain
Single wire seal (SEAL) For uninsulated cable connector
Low-cut safety shoes, S1