Hexagon head bolt
ASME B18.2.1 steel GR5 zinc-plated UNF
SCR-HCS-GR5-(ZN)-5/16_24X1/2
Register now and access more than 125,000 products
The mechanical properties are regulated in SAE J429
The thread length is based on standard ASME B18.2.1
1 INCH (in) = 25.4 mm
Standard thread tolerance in accordance with ASME B1.1 = 2A (for external thread)
Datasheets(X)
 | |
Nominal diameter (d1) | 5/16 in |
Length (l1) | 1/2 in |
Thread type | UNF |
Head height (k1) | 0.203 in |
External drive (s1) | WS1/2 |
Material | Steel |
Property class | GR5 |
Surface | Zinc plated |
Width across flats | 1/2 inch |
Other standard | 0 - not applicable |
Last viewed
Wheel brush Stainless steel, knotted, with shank
Wooden worktop For Compact workshop trolleys
Full cover For flat line-drainage shower boards, super-flat line-drainage shower boards, super-flat shower channels
Sheet metal beaver tail tile For easy and secure installation of the single lap roof hook
Steel square With stop
Die holder DIN EN 22568 Performance
Elastico safety harness for scaffolding
Damping system Redoslide
Hexagonal bolt with thread up to head
Wire cable barrel terminal with right-handed thread