Hexagon head bolt with shank and fine thread ISO 8765, steel 8.8, zinc flake, silver (ZFSHL)
ISO 8765 steel 8.8 zinc flake fine thread
SHR-6KT-ISO8765-8.8-(ZFSHL)-M36X3,0X160
Register now and access more than 125,000 products
Zinc-flake coatings are chrome-(VI)-free corrosion protection coatings for commercial vehicle assembly, construction machinery, agricultural vehicles and equipment, and all other areas that have corrosion protection requirements at vehicle construction level.
Corrosion resistance for ZFSHL is:
- Diameter ≥ M6 - 480h*
- Diameter ≥ M10 - 720h*
The designation ZFSHL refers to the following corrosion coating:
- Zinc-flake coating, with top coat, silver colour, with friction value adjusted lubrication.
- Adjusted friction coefficient range from 0.09μ – 0.14μ due to top coat with integrated lubricating particles
ISO 8765 replaces DIN 960 | There is some similarity | Nominal dimensions extended | Width across flats changed for M10, M12, M14 and M22.
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (d1) | M36 x 3 |
Length (l1) | 160 mm |
Head height (k1) | 22.5 mm |
Standards | ISO 8765 |
Material | Steel |
Property class | 8.8 |
Surface | Flake zinc silver |
RoHS-compliant | Yes |
Corrosion protection period | 720 h |
Head type | Hexagon head |
Drive type | Outer hexagon |
External drive (s1) | WS55 |
Thread type | Metric thread |
Pitch | 3 mm |
Thread form | Fine pitch thread |
Thread design | Partial thread |
Shank diameter | 36 mm |
Design | With shaft |
Last viewed
Stud with threaded end ≈ 2d
Star-shaped handle with connector and female thread
HSCo Multi Longlife machine tap for blind holes DIN 371/376
Sleeve with female thread EN10242 M2, hot-dip galvanised malleable iron
Hexagon nut DIN 934, brass, plain
Hexagon head serrated screw with flange W-0273, steel 100, plain
Taper-grooved dowel pin
Hexagon nut for pressure container construction (PED) ISO 4032, steel 25CrMo4, plain
VARIFIX® frame bracket For attached assembly of C-mounting rails (longitudinal, transverse, diagonal)
Machine tap Speedtap 4.0-Uni/Inox, straight grooved For metric ISO thread DIN 13