Hexagon head bolt with shank for pressure container construction (PED) ISO 4014, steel 25CrMo4, zinc-plated
ISO 4014 steel 25CrMo4 zinc plated
SCR-4014-PED-1.7218+QT-A2K-M12X120+3.1
PED 25CRMO4
Register now and access more than 125,000 products
Complies with Pressure Equipment Directive 2014/68/EU
- Ferritic steel 1.7218 in accordance with DIN EN 10269
- This material meets harmonised standards EN 1515-4, EN 13445-2 and EN 13480-2, and PAS 1057-10
- Temperature resistance: -60°C to 500°C
- Tensile strength: 600 MPa to 750 MPa
- Lot marking on the screw for easier tracking
- Material abbreviation: KG
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M12 |
Length (l1) | 120 mm |
Head height (k1) | 7.5 mm |
Standards | ISO 4014 |
Material | Ferritic steel, 1.7218 |
Surface | Zinc plated |
RoHS-compliant | Yes |
Drive type | Outer hexagon |
External drive (s1) | WS18 |
Thread type | Metric thread |
Pitch | 1.75 mm |
Thread form | Standard metric thread |
Thread design | Partial thread |
Shank diameter | 12 mm |
Product class | A |
Regulated area | DIN EN 1515-4 |
Last viewed
Low-cut safety shoe S2
Spiral clamping pin, standard design ISO 8750 steel plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and cross recess
Hex. engine turning unit DAF For the cut-out provided for manual, precise cranking of the engine
Hexagonal bolt
Shaft head screw
Raised countersunk tapping screw, C shape with H recessed head
Screw seal, self-centring