Hexagon head bolt with shank for pressure container construction (PED) ISO 4014, steel 25CrMo4, zinc-plated
ISO 4014 steel 25CrMo4 zinc plated
SCR-4014-PED-1.7218+QT-A2K-M12X75+3.1
PED 25CRMO4
Register now and access more than 125,000 products
Complies with Pressure Equipment Directive 2014/68/EU
- Ferritic steel 1.7218 in accordance with DIN EN 10269
- This material meets harmonised standards EN 1515-4, EN 13445-2 and EN 13480-2, and PAS 1057-10
- Temperature resistance: -60°C to 500°C
- Tensile strength: 600 MPa to 750 MPa
- Lot marking on the screw for easier tracking
- Material abbreviation: KG
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M12 |
Length (l1) | 75 mm |
Head height (k1) | 7.5 mm |
Standards | ISO 4014 |
Material | Ferritic steel, 1.7218 |
Property class | 0 - not applicable |
Surface | Zinc plated |
RoHS-compliant | Yes |
Drive type | Outer hexagon |
External drive (s1) | WS18 |
Thread type | Metric thread |
Pitch | 1.75 mm |
Thread form | Standard metric thread |
Thread design | Partial thread |
Shank diameter | 12 mm |
Design | 0 - not applicable |
Product class | A |
Regulated area | DIN EN 1515-4 |
Last viewed
Parallel pin with chamfered ends DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h11
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, A4-070 stainless steel, plain
Twist drill bit, metal Ruko DIN 338 type N HSS-G plain 118°
Square split spindle 8 mm notched on two sides
Flat washer For hexagon head bolts and nuts
Akura 44 profile half cylinder
Pipe and fastening clamp Multifix
Connection nipple with male thread EN1254, gunmetal, 4243G
Low-cut safety shoes, S2
Hexagon Socket Head Cap Screw with centre, with low head