Hexagon head bolt with shank for pressure container construction (PED) ISO 4014, steel 25CrMo4, zinc-plated
ISO 4014 steel 25CrMo4 zinc plated
SCR-4014-PED-1.7218+QT-A2K-M24X130+3.1
PED 25CRMO4
Register now and access more than 125,000 products
Complies with Pressure Equipment Directive 2014/68/EU
- Ferritic steel 1.7218 in accordance with DIN EN 10269
- This material meets harmonised standards EN 1515-4, EN 13445-2 and EN 13480-2, and PAS 1057-10
- Temperature resistance: -60°C to 500°C
- Tensile strength: 600 MPa to 750 MPa
- Lot marking on the screw for easier tracking
- Material abbreviation: KG
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M24 |
Length (l1) | 130 mm |
Head height (k1) | 15 mm |
Standards | ISO 4014 |
Material | Ferritic steel, 1.7218 |
Property class | 0 - not applicable |
Surface | Zinc plated |
RoHS-compliant | Yes |
Drive type | Outer hexagon |
External drive (s1) | WS36 |
Thread type | Metric thread |
Pitch | 3 mm |
Thread form | Standard metric thread |
Thread design | Partial thread |
Shank diameter | 24 mm |
Design | 0 - not applicable |
Product class | A |
Regulated area | DIN EN 1515-4 |
Last viewed
W-VD-A/F W-VD-A anchor rod hot-dip galvanised steel
Work trousers
Hexagonal bolt with shaft, SB fittings, DIN EN 15048-1 ISO 4014, A4-70 stainless steel, plain, with nut ISO 4032
Work trousers
EPS profile double cylinder
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Powerglider with special eye head
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Nitrile protective glove Ansell HyFlex® 11-917