Hexagon nut DIN 934, brass, plain
DIN 934 plain brass
NUT-HEX-DIN934-BRS-WS27-M18
Register now and access more than 125,000 products
DIN 934 has been withdrawn and replaced by ISO 4032/8673. There is no similarity (Nominal diameter changed | Some nut heights changed | Width across flats changed for M10, M12, M14, M22 | ISO 4032 for standard thread | ISO 8673 for fine thread).
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (D) | M18 |
Height (m1) | 15 mm |
External drive (s1) | WS27 |
Standards | DIN 934 |
Material | Brass |
Surface | Plain |
RoHS-compliant | Yes |
Last viewed
SNAP marker
Pan head tapping screw, shape C with flange
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Twist drill bit HSCo DIN 338 type RN oxide
Slotted raised countersunk head screw DIN 964, steel 4.8, zinc-plated, blue passivated (A2K)
GEFU® thread-rolling screw With Taptite 2000® thread, flat head with hexalobular drive
Counterbore Ruko subland twist drill "long" HSS DIN 8378 90° for thread core holes
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Case For angle grinders up to dia. 230