Hexagon nut DIN 934, steel I10I, plain
DIN 934 bare steel I10I
NUT-HEX-DIN934-I10I-WS8-M5
Register now and access more than 125,000 products
Hexagonal nuts complying with the DIN 934 standard cannot support test loads as per DIN EN ISO 898-2.
- The strength class designation has two vertical bars added before and after the strength code to differentiate.
DIN 934 has been withdrawn and replaced by ISO 4032/8673. There is no similarity (Nominal diameter changed | Some nut heights changed | Width across flats changed for M10, M12, M14, M22 | ISO 4032 for standard thread | ISO 8673 for fine thread).
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (D) | M5 |
Height (m1) | 4.4 mm |
External drive (s1) | WS8 |
Standards | DIN 934 |
Material | Steel |
Property class | I10I |
Surface | Plain |
RoHS-compliant | Yes |
Last viewed
UV 50 sun protection lotion
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head and hexalobular drive
System case 8.4.3
Soft-face hammer Halder SIMPLEX soft-face hammer Series 3729
Crescent ring Steel, plain
UV 50 sun protection spray
EPS profile thumbturn cylinder
Safety goggles Spica®
HSCo end mill, long, centre-cutting DIN 844L
Low-cut safety shoes, S1