Hexagon nut DIN 934, steel I10I, zinc-plated, yellow chromated (A2C/A3C)
DIN 934 steel I10I zinc plated yellow
NUT-HEX-DIN934-I10I-WS13-(A2C)-M8
Register now and access more than 125,000 products
Hexagon nuts complying with the DIN 934 standard cannot support test loads as per DIN EN ISO 898-2
- The strength class designation has two vertical bars added before and after the strength code to differentiate.
DIN 934 has been withdrawn and replaced by ISO 4032/8673. There is no similarity (nominal diameter changed | Some nut heights changed | Widths across flats changed for M10, M12, M14, M22 | ISO 4032 for standard thread | ISO 8673 for fine thread).
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (D) | M8 |
Height (m1) | 6.5 mm |
External drive (s1) | WS13 |
Standards | DIN 934 |
Material | Steel |
Property class | I10I |
Surface | Zinc plated yellow |
RoHS-compliant | No |
Last viewed
Hexagon socket set screw with ring cutter
Twist drill bit HSCo DIN 340 type RN OXIDE
Heavy Duty floor marking, strips
Transponder chip For Chiptronic furniture lock
Cable gland
Nature trousers
Fire protection duct T-piece I30/I60/I90/I120
Hexalobular-type cheese head screw ISO 14579, A2-070 stainless steel, plain
Shutter hinge
Welder clothing