Hexagon nut
DIN 934 plain steel I12I
NUT-HEX-DIN934-I12I-WS17-M10
Register now and access more than 125,000 products
Hexagonal nuts complying with DIN 934 cannot support test loads as per DIN EN ISO 898-2.
- The strength class designation has two vertical bars added before and after the strength code to differentiate.
DIN 934 has been withdrawn and replaced by ISO 4032/8673. There is no similarity (nominal Ø changed | Some nut heights changed | Width across flats changed for M10, M12, M14, M22 | ISO 4032 for standard thread | ISO 8673 for fine thread).
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M10 |
Height (m1) | 8 mm |
External drive (s1) | WS17 |
Standards | DIN 934 |
Material | Steel |
Property class | I12I |
Surface | Plain |
RoHS-compliant | Yes |
Last viewed
Precision hairline square Accuracy 00 in accordance with DIN 875, made from hardened stainless steel
3/8 inch extension
Blind rivet, type S
Hexagon nut, inch
Linch pin
H.Q.E. key for ring bolts
Washer For bolt
Hexagon nut with flange and clamping piece (full metal)
Hard hat For WSH III series and Ultimate face shields
Twist drill bit assortment HSCo DIN 338 MFD Speed 19 pcs