Hexagon nut
DIN 934 steel I12I plain
NUT-HEX-DIN934-I12I-WS22-M14
Register now and access more than 125,000 products
Hexagonal nuts complying with DIN 934 cannot support test loads as per DIN EN ISO 898-2.
- The strength class designation has two vertical bars added before and after the strength code to differentiate.
DIN 934 has been withdrawn and replaced by ISO 4032/8673. There is no similarity (nominal Ø changed | Some nut heights changed | Width across flats changed for M10, M12, M14, M22 | ISO 4032 for standard thread | ISO 8673 for fine thread).
 | |
Thread type x nominal diameter (D) | M14 |
Height (m1) | 11 mm |
External drive (s1) | WS22 |
Standards | DIN 934 |
Material | Steel |
Property class | I12I |
Surface | Plain |
RoHS-compliant | Yes |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Round head screw with square neck DIN 603, steel, strength class 8.8, zinc-plated, blue passivated (A2K)
ASSY®plus VG 4 COMBI construction screw Steel zinc plated full thread hexagon head
Cut-resistant gloves Ansell HyFlex 11-931
Façade construction screw Faba® type BZ with hexagon head and sealing washer
Large PPE presentation folder Martor 900952.08
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
OrgaAer partial extension
HSCo Multi Performance combination tap
Straight male fitting ISO 8434-1, zinc-nickel-plated steel, BSPP male thread with seal
Solid carbide end mill, short, quad blade
