Hexagon nut
ISO 4032 steel 10 zinc-flake silver ZFSHR
NUT-HEX-ISO4032-10-WS65-(ZFSHR)-M42
Register now and access more than 125,000 products
Zinc-flake coatings are chromium (VI)-free corrosion protection coatings for commercial vehicle construction, construction machines, agricultural vehicles and equipment, and all other fields that have vehicle construction standard corrosion protection requirements.
The corrosion resistance of ZFSHR is as follows:
- Diameter ≥ M6 - 480 h*
- Diameter ≥ M10 - 720 h*
- * Guideline values: No base metal corrosion in areas without thread in salt spray tests according to DIN EN ISO 9227 NSS.
The designation ZFSHR refers to the following corrosion coating:
- Zinc-flake coating, with top coat, silver colour, with lubrication that alters the friction coefficient.
- Adjusted friction coefficient range from 0.12-0.18 μ due to top coat with integrated lubricating particles
ISO 4032 replaces DIN 934 | There is no similarity | Nominal diameter changed | Some nut heights changed | Width across flats changed for M10, M12, M14, M22 | Only for standard thread | Fine thread moved to ISO 8673.
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M42 |
Height (m1) | 32.40 mm |
External drive (s1) | WS65 |
Standards | ISO 4032 |
Material | Steel |
Property class | 10 |
Surface | Flake zinc silver |
RoHS-compliant | Yes |
Last viewed
Slotted flat-head screw DIN 85, A2-70 stainless steel, plain
Ring grommet
Knurled thumb screw, high profile DIN 464, A1 stainless steel, plain
Work dungarees
EPS profile thumbturn cylinder
Clamping pin/clamping sleeve
pias® drilling screw, raised countersunk head with AW drive
Replacement misting spray head For REFILLO® cans
Washer For bolt
Low-cut safety shoes, S1P