Hexagon nut, inch
ASME B18.2.2 steel GR8 zinc plated UNC
NUT-HEX-FIN-GR8-(ZN)-3/4_10
Register now and access more than 125,000 products
1 INCH (in) = 25.4 mm
Mechanical properties are regulated in SAE J995
Standard thread tolerance according to ASME B1.1 = 2B (for internal thread)
Datasheets(X)
 | |
Nominal diameter in inches (D) | 3/4 in |
Height (m1) | 0.665 in |
Width across flats (s1) | 1 1/8 inch |
Material | Steel |
Property class | GR8 |
Surface | Zinc plated |
Thread type | UNC |
Number of thread starts per inch | 10 |
Last viewed
Hexagonal bolt with shank
Fully threaded hexagonal bolt and fine thread
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Taper plug GPN 605 Silicone (SI), natural
Sealing plug GPN 300 F Polyethylene (PE-LD), natural
WÜPLAST® pan head screw with flange and Z Phillips head WN 1411, steel 10.9, zinc-nickel-plated, transparent passivated (P3E)
HSS DIN 338 SMART STEP twist drill bit
Tensioning washer DIN 6796, phosphated steel
Work shirt Olymp Luxor Comfort Fit Daikin
Clamping pin/clamping sleeve ISO 13337 spring steel plain