Hexagon nut, inch
ASME B18.2.2 stainless steel 18-8 plain UNF
NUT-HX-FIN-(18-8)-3/4_16
Register now and access more than 125,000 products
1 INCH (in) = 25.4 mm
18-8 is comparable with an A2 stainless steel.
Mechanical properties are regulated in ASTM F594
Standard thread tolerance according to ASME B1.1 = 2B (for internal thread)
Datasheets(X)
 | |
Nominal diameter in inches (D) | 3/4 in |
Height (m1) | 0.665 in |
Width across flats (s1) | 1 1/8 inch |
Material | Stainless steel AISI 304, 18-8 |
Surface | Plain |
Thread type | UNF |
Number of thread starts per inch | 16 |
Last viewed
Shelf support For simple solutions
Low-cut safety shoes S1 ESD
Pipe nipple EN1254, gunmetal, 3530R
EPS profile thumbturn cylinder
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Safety knife Martor Secunorm Mizar 125002.02
Safety knife Martor Secunorm Handy 14402
Stretch X trousers
Ball joint pin ejector set 3 pieces
Compressor Power 50 L