Hexagon nut, inch
ASME B18.2.2 steel GR2 zinc plated UNC
NUT-HX-FIN-GR2-(ZN)-1/4_20
Register now and access more than 125,000 products
1 INCH (in) = 25.4 mm
Mechanical properties are regulated in SAE J995
Standard thread tolerance according to ASME B1.1 = 2B (for internal thread)
Datasheets(X)
 | |
Nominal diameter in inches (D) | 1/4 in |
Height (m1) | 1.000 in |
Width across flats (s1) | 7/16 inch |
Material | Steel |
Property class | GR2 |
Surface | Zinc plated |
Thread type | UNC |
Number of thread starts per inch | 20 |
Last viewed
Spiral clamping pin, standard design ISO 8750 A2 stainless steel plain
Screw with flattened half round head and hexagon socket ISO 7380-1 A4-070 stainless steel, plain
Twist drill bit HSCO DIN 338 SMART STEP
S3L safety shoe Uvex1 XCraft 6803
PE backfill sealant
S1PL safety shoe New Balance Logic Womens 1022
Plastic heat pump pipe
Locking lever with bolt For professional aluminium telescopic ladders
Polypropylene cable ties– industrial quality
S1PL safety shoe New Balance Elite Lite