Hexagon nut, inch
ASME B18.2.2 steel GR5 plain UNF
NUT-HX-FIN-GR5-(PL)-1 3/4_12
Register now and access more than 125,000 products
1 INCH (in) = 25.4 mm
Mechanical properties are regulated in SAE J995
Standard thread tolerance according to ASME B1.1 = 2B (for internal thread)
Datasheets(X)
 | |
Nominal diameter in inches (D) | 1-3/4 in |
Height (m1) | 1.500 in |
Width across flats (s1) | 2 5/8 inch |
Material | Steel |
Property class | GR5 |
Surface | Plain |
Thread type | UNF |
Number of thread starts per inch | 12 |
Last viewed
Crepe masking tape
Lintel casing bracket For door closer with scissor arm mechanism or slide rail
Cetus trousers with holster pockets
Pan Head screw with hexalobular head ISO 14583, steel, strength class 8.8, zinc-nickel-plated, silver (ZNSHL)
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Single-handed grease gun With variable pressure setting directly on handle
Reserve taper grooved dowel pin ISO 8741 steel plain
Cetus trousers with holster pockets
Divider OrgaAer
Work trousers