Hexagon nut, inch
ASME B18.2.2 steel GR5 plain UNC
NUT-HX-FIN-GR5-(PL)-5/8_11
Register now and access more than 125,000 products
1 INCH (in) = 25.4 mm
Mechanical properties are regulated in SAE J995
Standard thread tolerance according to ASME B1.1 = 2B (for internal thread)
 | |
Nominal diameter in inches (D) | 5/8 in |
Höhe (m1) | 0.559 in |
Width across flats (s1) | 15/16 inch |
Werkstoff | Steel |
Property class | GR5 |
Oberfläche | Plain |
Thread type | UNC |
Number of thread starts per inch | 11 |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Sanding disc, fleece Klingspor NDS 400
Divider assortment With compartment rails and compartment dividers for system dimensions 8.6
Safety boots, S4
Hexagon head bolt with shank for pressure container construction (PED) ISO 4014, steel 25CrMo4, plain
Screw with flattened half round head and hexagon socket ISO 7380-1 A2-070 stainless steel, plain
Safety sandals, S1P
Hammer drill bit Max Quadro-L Vario
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
Glow plug tip removal set 14 pieces
Low-cut safety shoes, S2
